Degreasing Coating Raw Parts Cleaning & Phosphating Drying
Degreasing
Pre-treatment operations are used to remove oils and light rust prior to coating.
Coating Raw Parts
The dry bulk zinc aluminium powders are combined with parts and heated at prescribed times and temperature in the retort chamber.
Cleaning & Phosphating
Parts are rinsed to remove coating dust after the heating cycle and passivated with a zinc phosphate solution.
Drying
All parts are dried and packed for shipment.

GREENKOTE| PM Thermal Diffusion Coating| HC & HT Coatings| TPCT Coating

HEATING IT UP WITH INNOVATIVE TECHNOLOGY.

GREENKOTE® technology and products are superior to other competitive applications. We use a thermo-diffusion process where atoms from the desired coating powder are diffused into the metal substrate surface through Thermo-Chemical Surface Modification (TCSM). We use 90% less powder than regular diffusion coatings at half the normal energy and cycle time.

GREENKOTES's coating technology uses 90% less powder than regular diffusion coatings at half the normal energy and cycle time on a variety of coating applications.

The process is liquid free, and adhesion for duplex coatings is exceptional. This simple and low-labor cost process results in major costs savings for our customers. The number of possible coatings combinations is limitless.

Better performance.

Our premier coatings replace other common coating applications including paint, chemical deposition (with or without electrolytic use) and more specialized methods such as PVD and CVD diffusion coatings.

Thermo-Diffusion technology is compatible with metallic, inorganic and zinc coatings, offering improved bonding for duplex coatings. With our coatings you get better corrosion protection and wear resistance, as well as enhanced anti-seizing and torque lubricity and retention.

And our coatings provide major environmental benefits and comply with demanding industry standards.

Coating products to meet your needs.

We offer a wide line of products for various coatings applications. From our PM-1 and PM-10 anti-corrostion coatings to our HC series for hard facing coatings, we have an option that fits your needs. HT-Tri metal coatings are excellent for high temperatures oxidation protection and TPCT offer thin powder and bulk process applications.

High market acceptance and approval rate.

Our customers in the automotive and construction industries, among others, acknowledge the innovative and high-quality solutions that GREENKOTE coating applications provide. We are pleased to be of service to such a fine list of market leaders.

Definitive test results/competitive analysis.

We are extremely proud of the results on the extensive testing done on our thermo-diffusion powder coatings. These results point to the exceptional quality and corrosion resistance of GREENKOTE products. Our products stack up favorably against other competitive coatings solutions.